USB connection problems can be caused for many different reasons and, although there are hardware-related failures (which are relatively rare), most USB issues can be traced to driver versions, software and OS settings that can affect connectivity. First, if you are trying to connect a Harmony 900, Harmony 1000 or Harmony 1100, do not try to use MyHarmony. This newer application for configuring Harmony controllers is not compatible with these models. Always make sure that your USB cable is working properly (test with another device like a camera) and, if you are having connection problems, always start up from a fresh, initial state. What that means is that you should pull the battery from the remote, wait a full minute and then re-install the battery. Note that the battery needs to be well-charged and installed for the H900 or H1000/1100 to be able to USB-connect.
For the computer, you should shut it down entirely (full power-off), re-boot and then launch the Harmony Software and USB-connect the remote. This procedure will put the remote and computer into a fresh starting state, which can be important for loading the driver. Sometimes, this is all that is needed. If communication does not start up within 15 seconds or so, try unplugging the cable from the remote, wait 3 seconds and plug it back in. If there is still no change, then do the exact same procedure again (battery pull, shut down, etc), but this time, have the remote USB-connected before the computer is powered-on. If there is still no change, you may be able to USB-connect while the remote is in .
Finally, if there is still no change, then you may need to use a new set of drivers. Instructions below are per Logitech's technical support: Windows 10 Logitech has recently updated the driver for the Harmony 900 and H1000/1100 to be compatible with Windows 10. Try the following instructions as per Logitech:. Download the Logitech Remotes Software App (7.7.1) from. Run the “LogitechHarmonyRemote7.7.1-WIN-x86.exe” file. Click Next button in “Welcome to the Logitech Remote Client Software Setup Wizard” page. Click Install button in “Choose components” page.
Click “Ok” button in “Connect the remote model H900/H1000/H1100” page. Connect your remote to your PC. Click “Ok” button in “Don’t forget to disconnect the remote after 60 seconds” page. Click “Yes” button in “Remote control USB driver – “InstallShield Wizard”. Disconnect the remote from your PC.
Click “Next” and “Finish” button to complete the install flow. OS X v10.9 (Mavericks), OS X v10.10 (Yosemite), OS X v10.11 (El Capitan) or OS X v10.12 (Sierra) Logitech has recently updated the driver for the Harmony 900 and Harmony 1000/1100 to be compatible with certain versions of the Mac OS. Try the following instructions as per Logitech. Note that you may need to temporarily change your security settings in order to download the driver patch. Disconnect your remote from your computer and close the Harmony Desktop Software 2.
Mapping Tonal Harmony Pro is a free program for Mac that belongs to the category Utilities-tools, and has been developed by MDECKS MUSIC, LLC. Logitech Harmony universal remotes let you control your home media, lighting and other smart devices from one place.
Download the LogitechHarmonyDriverPatch.pkg using Safari Browser by clicking the link below 3. It will download as a package file 4.
Run the package file. This will delete the older driver files and install the newer ones 5. Reboot your Mac to initialize the new drivers 6.
Launch the Harmony Software and connect your remote to your Mac Additional guidance for OS X v10.12 (Sierra) If you are using Mac Sierra, some users have reported that the only way they were able to update their Harmony 900/1100 was to use the Harmony Software ver 7.8.1 and install the legacy Java 6 environment. Apple has provided a download link for the Java 6 installation and you can find it at the top of this Apple technical bulletin: .
Control your home from your iPhone or iPad. Dim the lights, close the blinds, crank the volume, and start the movie— with one touch. Streamline your life using personalized, multi-device Activities that can be started with one touch. Combine home entertainment—TVs, stereos, cable/satellite set-top boxes, and game consoles—with home automation—connected lights, locks, blinds, thermostats, sensors, and more.
Harmony brings it together. You bring it to life. Use of the Harmony app requires one of the following Logitech Harmony hub-based remote controls: Harmony Pro, Harmony Elite, Harmony Companion, Harmony Hub, Harmony Ultimate Home, Harmony Home Control, Harmony Home Hub, Harmony Ultimate, Harmony Smart Control, Harmony Smart Keyboard, or Harmony Ultimate Hub (each sold separately).
To learn about the full line of Harmony remotes, or to make a purchase, please visit www.logitech.com/harmony-remotes. Every remote you’ll ever need Control home entertainment devices with your iPhone or iPad when paired with a Harmony hub-based remote control. Control connected lights, locks, blinds, thermostats, and more from a single app, whether inside or outside your home. Check devices status and make adjustments remotely.
Set up custom schedules to turn devices on or off at specific times or on specific days. With just one touch, start multiple devices together using Activities such as Good Morning, Good Night, Watch TV, Listen to Music, or Play Games. Create up to 50 favorite channels with custom icons for quick access to your entertainment. Use swipe or tap gestures directly on the screen to adjust the volume, change channels, fast-forward, rewind, and more.
Install the app on each iPhone or iPad in the house and everyone can have their own personalized favorite channels and custom gestures. Control devices inside closed media cabinets. Hide the clutter of your entertainment devices and never worry about pointing your phone at your TV. Compatible with many IR and Bluetooth® game consoles.
Compatible with an ever growing list over 270,000 devices from more than 6,000 brands. See myharmony.com/compatibility for latest compatibility information. Customer Support We want to ensure you will enjoy your remote. If you run into issues or have any questions, we have help available. You can find online support articles at Join our online support community at community.myharmony.com Contact our support team at Terms of Use: https://files.myharmony.com/Assets/legal/en/termsofuse.html. LeeGeeeeeee, Works good for what I use it for I don’t use the home control bs so I can’t speak to that. I’m a retired computer professional, build my own computers and networks and I still could care less if this connects to a superfluous device like Alexa.
This is my fourth Harmony remote and besides being stupid expense I think it works great as an entertainment center remote. It’s far more reliable and useful then the previous ones. I use the actual remote mostly but it sure is nice to be able to use my iPhone or iPad to control the entertainment center when remote is not handy. I had the Link and that was complete garbage. This combo seems to combine the best features of a remote like the 650 and an idevice app.
This app actually consistently works instead of only when it felt like it like on the Link. The Help feature seems to work better as well. The only thing I don’t like is why the hell do I have to use the app in landscape mode on the iPad?
There’s more room on the iPad screen then the iPhone and the iPhone uses portrait mode. I just find landscape mode awkward.
The best part of the app though is it makes configuration much easier. Took me only a couple minutes to figure out how to add a custom command. So far I love it. LeeGeeeeeee, Works good for what I use it for I don’t use the home control bs so I can’t speak to that. I’m a retired computer professional, build my own computers and networks and I still could care less if this connects to a superfluous device like Alexa. This is my fourth Harmony remote and besides being stupid expense I think it works great as an entertainment center remote. It’s far more reliable and useful then the previous ones.
I use the actual remote mostly but it sure is nice to be able to use my iPhone or iPad to control the entertainment center when remote is not handy. I had the Link and that was complete garbage. This combo seems to combine the best features of a remote like the 650 and an idevice app. This app actually consistently works instead of only when it felt like it like on the Link.
The Help feature seems to work better as well. The only thing I don’t like is why the hell do I have to use the app in landscape mode on the iPad? There’s more room on the iPad screen then the iPhone and the iPhone uses portrait mode. I just find landscape mode awkward. The best part of the app though is it makes configuration much easier. Took me only a couple minutes to figure out how to add a custom command. So far I love it.
Steady Hawkin, Close to perfect First and foremost, the Harmony Hub is an absolute staple for any Media setup. I have finally been able to put away 7 remotes, and end the battle of pressing 4-5 buttons on 3 different remotes just to change input sources. Just pressing on an action to launch everything to the source and perfect setting has made my life so much better. This really is one of my most used apps.
For the most part, once you get used to how the setup of actions is done, it’s pretty intuitive. You really can customize almost everything to the absolute perfect setting, which then requires just the push of a button.
The issue is, it takes allot of time to figure out where allot these options are, and how they work. The menu options and layout absolutely needs an overhaul. It also becomes a complete nightmare is you replace an existing component (ex. TV) and have several existing actions tied to it.
Most recently I replaced my TV, and had to completely redo all of actions, which sucked, but in the long run helped to refine my setup. My wish list to make this app perfect would include: a real light/dark UI, a more intuitive menu layout, support for the iPhone X, and HomeKit integration. Overall, despite the short comings, I couldn’t imagine switching over to any other system. Steady Hawkin, Close to perfect First and foremost, the Harmony Hub is an absolute staple for any Media setup. I have finally been able to put away 7 remotes, and end the battle of pressing 4-5 buttons on 3 different remotes just to change input sources. Just pressing on an action to launch everything to the source and perfect setting has made my life so much better.
This really is one of my most used apps. For the most part, once you get used to how the setup of actions is done, it’s pretty intuitive.
You really can customize almost everything to the absolute perfect setting, which then requires just the push of a button. The issue is, it takes allot of time to figure out where allot these options are, and how they work. The menu options and layout absolutely needs an overhaul. It also becomes a complete nightmare is you replace an existing component (ex. TV) and have several existing actions tied to it. Most recently I replaced my TV, and had to completely redo all of actions, which sucked, but in the long run helped to refine my setup.
My wish list to make this app perfect would include: a real light/dark UI, a more intuitive menu layout, support for the iPhone X, and HomeKit integration. Overall, despite the short comings, I couldn’t imagine switching over to any other system. Amex30year user, Steep and long learning curve It has taken me a year to learn how to use this hub. It has been frustrating and dumbfounding at times, but in the end it is a powerful and good hub that can truly control a ton of devices. I have 20+ lights (switches and dimmers), 3 tv’s, 14 Sonos speakers, and fans on this. With scenes galore and geo settings set up thru life 360 it automates a ton of things for us.
I use the Z Wave hub as well to control the lights. We also integrate with Alexa and I can verbally control my entire TV sets with cable box and fire tv and Roku even to change channel and adjust volume and music. Of course there are tiny quirks and some small gaps, but overall it is impressive. Occasionally there are app updates that can introduce some minor changes but it is stable for the most part. Logitech has a hard job with all the devices and features and lack of knowledge for consumers so hats off to them. So be prepared to make this a learning experience.
It took me a year to get it close to perfect, but I do love it. Learn to research on your own, use google and forums, leverage their Cust service. My wife who is not tech savvy still can make everything work so I’m the end, it’s functional. Amex30year user, Steep and long learning curve It has taken me a year to learn how to use this hub.
It has been frustrating and dumbfounding at times, but in the end it is a powerful and good hub that can truly control a ton of devices. I have 20+ lights (switches and dimmers), 3 tv’s, 14 Sonos speakers, and fans on this. With scenes galore and geo settings set up thru life 360 it automates a ton of things for us.
I use the Z Wave hub as well to control the lights. We also integrate with Alexa and I can verbally control my entire TV sets with cable box and fire tv and Roku even to change channel and adjust volume and music. Of course there are tiny quirks and some small gaps, but overall it is impressive. Occasionally there are app updates that can introduce some minor changes but it is stable for the most part. Logitech has a hard job with all the devices and features and lack of knowledge for consumers so hats off to them. So be prepared to make this a learning experience.
It took me a year to get it close to perfect, but I do love it. Learn to research on your own, use google and forums, leverage their Cust service. My wife who is not tech savvy still can make everything work so I’m the end, it’s functional.